Incorrect position of the switches The gear in the vehicle's gearbox is not engaged, the engine does not work. Emergency stop activated: The radio remote control does not work. The preset valve does not turn on: The hydraulic oil level is low: Dirt in the hydraulic system. The nozzle in the pipeline with the load sensor is clogged
Set rotary switch 14 to the “Remote control” position, and switch 8 to the “Mast” position. Shift into gear correctly and start the engine. Unlock the emergency stop and start the control unit with a signal. Check the charging of the battery on the transmitter. Restart the radio remote control (signal). Switch frequency. Continue working with the cable remote control unit. Check the solenoid and wiring. Turn on the mast pre-installation valve manually. Contact the company's customer service